diff options
Diffstat (limited to 'trunk/templates/vserver/vserver.d/etc/rc.d')
19 files changed, 0 insertions, 1825 deletions
diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc b/trunk/templates/vserver/vserver.d/etc/rc.d/rc deleted file mode 100755 index eefbcc5..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -if [ "$1" == "3" ]; then - /etc/rc.d/rc.M -elif [ "$1" == "6" ]; then - /etc/rc.d/rc.6 -else - echo "Invalid level." - exit 1 -fi - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.0 b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.0 deleted file mode 100755 index bfec90a..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.0 +++ /dev/null @@ -1,110 +0,0 @@ -#! /bin/sh -# -# rc.6 This file is executed by init when it goes into runlevel -# 0 (halt) or runlevel 6 (reboot). It kills all processes, -# unmounts file systems and then either halts or reboots. -# -# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/etc:/bin:/usr/bin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Set linefeed mode to avoid staircase effect. -stty onlcr - -echo "Running shutdown script $0:" - -# Find out how we were called. -case "$0" in - *0) - command="halt" - ;; - *6) - command=reboot - ;; - *) - echo "$0: call me as \"rc.0\" or \"rc.6\" please!" - exit 1 - ;; -esac - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the MySQL database: -if [ -r /var/run/mysql/mysql.pid ]; then - . /etc/rc.d/rc.mysqld stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Try to kill dhcpcd so the DHCP leases can be returned: -killall -15 dhcpcd 1> /dev/null 2> /dev/null - -# Try to shut down pppd: -PS="$(ps ax)" -if echo "$PS" | grep -q -w pppd ; then - if [ -x /usr/sbin/ppp-off ]; then - /usr/sbin/ppp-off - fi -fi - -# Turn off process accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off process accounting." - /sbin/accton -fi - -# Kill all processes. -# INIT is supposed to handle this entirely now, but this didn't always -# work correctly without this second pass at killing off the processes. -# Since INIT already notified the user that processes were being killed, -# we'll avoid echoing this info this time around. -if [ "$1" != "fast" ]; then # shutdown did not already kill all processes - killall5 -15 - sleep 5 - killall5 -9 -fi - -# Carry a random seed between reboots. -echo "Saving random seed from /dev/urandom in /etc/random-seed." -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - -# Before unmounting file systems write a reboot or halt record to wtmp. -$command -w - -# Clear /var/lock/subsys. -if [ -d /var/lock/subsys ]; then - rm -f /var/lock/subsys/* -fi - -# This never hurts: -sync - -# sleep 1 fixes problems with some hard drives that don't -# otherwise finish syncing before reboot or poweroff -sleep 1 - -# This is to ensure all processes have completed on SMP machines: -wait - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.4 b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.4 deleted file mode 100644 index b972052..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.4 +++ /dev/null @@ -1,256 +0,0 @@ -#!/bin/sh -# -# rc.M This file is executed by init(8) when the system is being -# initialized for one of the "multi user" run levels (i.e. -# levels 1 through 6). It usually does mounting of file -# systems et al. -# -# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003 -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Heavily modified by Patrick Volkerding <volkerdi@slackware.com> -# - -# Tell the viewers what's going to happen. -echo "Going multiuser..." - -# Screen blanks after 15 minutes idle time, and powers down in one hour -# if the kernel supports APM or ACPI power management: -#/bin/setterm -blank 15 -powersave powerdown -powerdown 60 - -# Set the hostname. -#if [ -r /etc/HOSTNAME ]; then -# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .) -#else - # fall back on this old default: -# echo "darkstar.example.net" > /etc/HOSTNAME -# /bin/hostname darkstar -#fi - -# Save the contents of 'dmesg': -#/bin/dmesg -s 65536 > /var/log/dmesg - -# Start the system logger. -if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then - . /etc/rc.d/rc.syslog start -fi - -# Initialize PCMCIA devices: -# -# NOTE: This used to be started near the top of rc.S so that PCMCIA devices -# could be fsck'ed along with the other drives. This had some unfortunate -# side effects, however, since root isn't yet read-write, and /var might not -# even be mounted the .pid files can't be correctly written in /var/run and -# the pcmcia system can't be correctly shut down. If you want some PCMCIA -# partition to be mounted at boot (or when the card is inserted) then add -# the appropriate lines to /etc/pcmcia/scsi.opts. -# -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia start - # The cards might need a little extra time here to initialize. - if [ -r /var/run/cardmgr.pid ]; then - sleep 5 - fi -fi - -# Initialize the networking hardware. If your network driver is a module -# and you haven't loaded it manually, this will be deferred until after -# the hotplug system loads the module below. -#if [ -x /etc/rc.d/rc.inet1 ]; then -# . /etc/rc.d/rc.inet1 -#fi - -# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices: -if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then - # Don't run hotplug if 'nohotplug' was given at boot. - if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "Activating hardware detection: /etc/rc.d/rc.hotplug start" - . /etc/rc.d/rc.hotplug start - fi -fi - -# Start networking daemons: -if [ -x /etc/rc.d/rc.inet2 ]; then - . /etc/rc.d/rc.inet2 -fi - -# Remove stale locks and junk files (must be done after mount -a!) -/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null - -# Remove stale hunt sockets so the game can start. -if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then - echo "Removing your stale hunt sockets from /tmp." - /bin/rm -f /tmp/hunt* -fi - -# Ensure basic filesystem permissions sanity. -chmod 755 / 2> /dev/null -chmod 1777 /tmp /var/tmp - -# Update all the shared library links: -if [ -x /sbin/ldconfig ]; then - echo "Updating shared library links: /sbin/ldconfig" - /sbin/ldconfig -fi - -# Update the X font indexes: -if [ -x /usr/X11R6/bin/fc-cache ]; then - echo "Updating X font indexes: /usr/X11R6/bin/fc-cache" - /usr/X11R6/bin/fc-cache -fi - -# Start the print spooling system. This will usually be LPRng (lpd) or CUPS. -if [ -x /etc/rc.d/rc.cups ]; then - # Start CUPS: - /etc/rc.d/rc.cups start -elif [ -x /etc/rc.d/rc.lprng ]; then - # Start LPRng (lpd): - . /etc/rc.d/rc.lprng start -fi - -# Start netatalk. (a file/print server for Macs using Appletalk) -if [ -x /etc/rc.d/rc.atalk ]; then - /etc/rc.d/rc.atalk -fi - -# Start smartd, which monitors the status of S.M.A.R.T. compatible -# hard drives and reports any problems. Note some devices (which aren't -# smart, I guess ;) will hang if probed by smartd, so it's commented out -# by default. -#if [ -x /usr/sbin/smartd ]; then -# /usr/sbin/smartd -#fi - -# Monitor the UPS with genpowerd. -# To use this, uncomment this section and edit your settings in -# /etc/genpowerd.conf (serial device, UPS type, etc). For more information, -# see "man genpowerd" or the extensive documentation in the -# /usr/doc/genpower-1.0.3 directory. -# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want -# support for stopping the UPS's inverter after the machine halts. -#if [ -x /sbin/genpowerd ]; then -# echo "Starting genpowerd daemon..." -# /sbin/genpowerd -#fi - -# Turn on process accounting. To enable process accounting, make sure the -# option for BSD process accounting is enabled in your kernel, and then -# create the file /var/log/pacct (touch /var/log/pacct). By default, process -# accounting is not enabled (since /var/log/pacct does not exist). This is -# because the log file can get VERY large. -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - /sbin/accton /var/log/pacct - chmod 640 /var/log/pacct - echo "Process accounting turned on." -fi - -# Start crond (Dillon's crond): -# If you want cron to actually log activity to /var/log/cron, then change -# -l10 to -l8 to increase the logging level. -if [ -x /usr/sbin/crond ]; then - /usr/sbin/crond -l10 >>/var/log/cron 2>&1 -fi - -# Start atd (manages jobs scheduled with 'at'): -if [ -x /usr/sbin/atd ]; then - /usr/sbin/atd -b 15 -l 1 -fi - -# Slackware-Mini-Quota-HOWTO: -# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to -# the appropriate partitions as listed in /etc/fstab. Here's an example: -# -# /dev/hda2 /home ext3 defaults,usrquota 1 1 -# -# You'll then need to setup initial quota files at the top of the partitions -# to support quota, like this: -# touch /home/aquota.user /home/aquota.group -# chmod 600 /home/aquota.user /home/aquota.group -# -# Then, reboot to activate the system. -# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the -# official Quota Mini-HOWTO has lots of useful information. That can be found -# here: /usr/doc/Linux-HOWTOs/Quota - -# Check quotas and then turn quota system on: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotacheck ]; then - echo "Checking filesystem quotas: /sbin/quotacheck -avugm" - /sbin/quotacheck -avugm - fi - if [ -x /sbin/quotaon ]; then - echo "Activating filesystem quotas: /sbin/quotaon -avug" - /sbin/quotaon -avug - fi -fi - -# Start the sendmail daemon: -if [ -x /etc/rc.d/rc.sendmail ]; then - . /etc/rc.d/rc.sendmail start -fi - -# Start the APM daemon if APM is enabled in the kernel: -if [ -x /usr/sbin/apmd ]; then - if cat /proc/apm 1> /dev/null 2> /dev/null ; then - echo "Starting APM daemon: /usr/sbin/apmd" - /usr/sbin/apmd - fi -fi - -# Start the ACPI (Advanced Configuration and Power Interface) daemon: -if [ -x /etc/rc.d/rc.acpid ]; then - . /etc/rc.d/rc.acpid start -fi - -# Load ALSA (sound) defaults: -if [ -x /etc/rc.d/rc.alsa ]; then - . /etc/rc.d/rc.alsa -fi - -# Load a custom screen font if the user has an rc.font script. -if [ -x /etc/rc.d/rc.font ]; then - . /etc/rc.d/rc.font -fi - -# Load a custom keymap if the user has an rc.keymap script. -if [ -x /etc/rc.d/rc.keymap ]; then - . /etc/rc.d/rc.keymap -fi - -# Initialize HP Officejet support: -if [ -x /etc/rc.d/rc.hpoj ]; then - . /etc/rc.d/rc.hpoj start -fi - -# Start the MySQL database: -if [ -x /etc/rc.d/rc.mysqld ]; then - . /etc/rc.d/rc.mysqld start -fi - -# Start Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - . /etc/rc.d/rc.httpd start -fi - -# Start Samba (a file/print server for Win95/NT machines). -# Samba can be started in /etc/inetd.conf instead. -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba start -fi - -# Start the GPM mouse server: -if [ -x /etc/rc.d/rc.gpm ]; then - . /etc/rc.d/rc.gpm start -fi - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Start the local setup procedure. -if [ -x /etc/rc.d/rc.local ]; then - . /etc/rc.d/rc.local -fi - -# All done. diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.6 b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.6 deleted file mode 100755 index bfec90a..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.6 +++ /dev/null @@ -1,110 +0,0 @@ -#! /bin/sh -# -# rc.6 This file is executed by init when it goes into runlevel -# 0 (halt) or runlevel 6 (reboot). It kills all processes, -# unmounts file systems and then either halts or reboots. -# -# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/etc:/bin:/usr/bin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Set linefeed mode to avoid staircase effect. -stty onlcr - -echo "Running shutdown script $0:" - -# Find out how we were called. -case "$0" in - *0) - command="halt" - ;; - *6) - command=reboot - ;; - *) - echo "$0: call me as \"rc.0\" or \"rc.6\" please!" - exit 1 - ;; -esac - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the MySQL database: -if [ -r /var/run/mysql/mysql.pid ]; then - . /etc/rc.d/rc.mysqld stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Try to kill dhcpcd so the DHCP leases can be returned: -killall -15 dhcpcd 1> /dev/null 2> /dev/null - -# Try to shut down pppd: -PS="$(ps ax)" -if echo "$PS" | grep -q -w pppd ; then - if [ -x /usr/sbin/ppp-off ]; then - /usr/sbin/ppp-off - fi -fi - -# Turn off process accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off process accounting." - /sbin/accton -fi - -# Kill all processes. -# INIT is supposed to handle this entirely now, but this didn't always -# work correctly without this second pass at killing off the processes. -# Since INIT already notified the user that processes were being killed, -# we'll avoid echoing this info this time around. -if [ "$1" != "fast" ]; then # shutdown did not already kill all processes - killall5 -15 - sleep 5 - killall5 -9 -fi - -# Carry a random seed between reboots. -echo "Saving random seed from /dev/urandom in /etc/random-seed." -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - -# Before unmounting file systems write a reboot or halt record to wtmp. -$command -w - -# Clear /var/lock/subsys. -if [ -d /var/lock/subsys ]; then - rm -f /var/lock/subsys/* -fi - -# This never hurts: -sync - -# sleep 1 fixes problems with some hard drives that don't -# otherwise finish syncing before reboot or poweroff -sleep 1 - -# This is to ensure all processes have completed on SMP machines: -wait - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.K b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.K deleted file mode 100755 index 00a1501..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.K +++ /dev/null @@ -1,88 +0,0 @@ -#! /bin/sh -# -# rc.K This file is executed by init when it goes into runlevel -# 1, which is the administrative state. It kills all -# daemons and then puts the system into single user mode. -# Note that the file systems are kept mounted. -# -# Version: @(#)/etc/rc.d/rc.K 3.1415 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/bin:/usr/bin:/usr/sbin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Try to turn off quota: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotaoff ]; then - echo "Turning off filesystem quotas." - /sbin/quotaoff -a - fi -fi - -# Try to turn off accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off accounting." - /sbin/accton -fi - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Shut down the NFS server: -if [ -x /etc/rc.d/rc.nfsd ]; then - /etc/rc.d/rc.nfsd stop -fi - -# Shut down PCMCIA devices: -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia stop - # The cards might need a little extra time here to initialize. - sleep 5 -fi - -# Kill all processes. -echo -echo "Sending all processes the SIGHUP signal." -killall5 -1 -echo -n "Waiting for processes to hang up" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo -echo "Sending all processes the SIGTERM signal." -killall5 -15 -echo -n "Waiting for processes to terminate" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo -echo "Sending all processes the SIGKILL signal." -killall5 -9 -echo -n "Waiting for processes to exit" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo - -# Now go to the single user level -echo "Going to single user mode..." -telinit -t 1 1 - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.M b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.M deleted file mode 100755 index 0cb3343..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.M +++ /dev/null @@ -1,256 +0,0 @@ -#!/bin/sh -# -# rc.M This file is executed by init(8) when the system is being -# initialized for one of the "multi user" run levels (i.e. -# levels 1 through 6). It usually does mounting of file -# systems et al. -# -# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003 -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Heavily modified by Patrick Volkerding <volkerdi@slackware.com> -# - -# Tell the viewers what's going to happen. -echo "Going multiuser..." - -# Screen blanks after 15 minutes idle time, and powers down in one hour -# if the kernel supports APM or ACPI power management: -#/bin/setterm -blank 15 -powersave powerdown -powerdown 60 - -# Set the hostname. -#if [ -r /etc/HOSTNAME ]; then -# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .) -#else - # fall back on this old default: -# echo "darkstar.example.net" > /etc/HOSTNAME -# /bin/hostname darkstar -#fi - -# Save the contents of 'dmesg': -#/bin/dmesg -s 65536 > /var/log/dmesg - -# Start the system logger. -if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then - . /etc/rc.d/rc.syslog start -fi - -# Initialize PCMCIA devices: -# -# NOTE: This used to be started near the top of rc.S so that PCMCIA devices -# could be fsck'ed along with the other drives. This had some unfortunate -# side effects, however, since root isn't yet read-write, and /var might not -# even be mounted the .pid files can't be correctly written in /var/run and -# the pcmcia system can't be correctly shut down. If you want some PCMCIA -# partition to be mounted at boot (or when the card is inserted) then add -# the appropriate lines to /etc/pcmcia/scsi.opts. -# -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia start - # The cards might need a little extra time here to initialize. - if [ -r /var/run/cardmgr.pid ]; then - sleep 5 - fi -fi - -# Initialize the networking hardware. If your network driver is a module -# and you haven't loaded it manually, this will be deferred until after -# the hotplug system loads the module below. -#if [ -x /etc/rc.d/rc.inet1 ]; then -# . /etc/rc.d/rc.inet1 -#fi - -# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices: -if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then - # Don't run hotplug if 'nohotplug' was given at boot. - if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "Activating hardware detection: /etc/rc.d/rc.hotplug start" - . /etc/rc.d/rc.hotplug start - fi -fi - -# Start networking daemons: -if [ -x /etc/rc.d/rc.inet2 ]; then - . /etc/rc.d/rc.inet2 -fi - -# Remove stale locks and junk files (must be done after mount -a!) -/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null - -# Remove stale hunt sockets so the game can start. -if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then - echo "Removing your stale hunt sockets from /tmp." - /bin/rm -f /tmp/hunt* -fi - -# Ensure basic filesystem permissions sanity. -chmod 755 / 2> /dev/null -chmod 1777 /tmp /var/tmp - -# Update all the shared library links: -if [ -x /sbin/ldconfig ]; then - echo "Updating shared library links: /sbin/ldconfig" - /sbin/ldconfig -fi - -# Update the X font indexes: -if [ -x /usr/X11R6/bin/fc-cache ]; then - echo "Updating X font indexes: /usr/X11R6/bin/fc-cache" - /usr/X11R6/bin/fc-cache -fi - -# Start the print spooling system. This will usually be LPRng (lpd) or CUPS. -if [ -x /etc/rc.d/rc.cups ]; then - # Start CUPS: - /etc/rc.d/rc.cups start -elif [ -x /etc/rc.d/rc.lprng ]; then - # Start LPRng (lpd): - . /etc/rc.d/rc.lprng start -fi - -# Start netatalk. (a file/print server for Macs using Appletalk) -if [ -x /etc/rc.d/rc.atalk ]; then - /etc/rc.d/rc.atalk -fi - -# Start smartd, which monitors the status of S.M.A.R.T. compatible -# hard drives and reports any problems. Note some devices (which aren't -# smart, I guess ;) will hang if probed by smartd, so it's commented out -# by default. -#if [ -x /usr/sbin/smartd ]; then -# /usr/sbin/smartd -#fi - -# Monitor the UPS with genpowerd. -# To use this, uncomment this section and edit your settings in -# /etc/genpowerd.conf (serial device, UPS type, etc). For more information, -# see "man genpowerd" or the extensive documentation in the -# /usr/doc/genpower-1.0.3 directory. -# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want -# support for stopping the UPS's inverter after the machine halts. -#if [ -x /sbin/genpowerd ]; then -# echo "Starting genpowerd daemon..." -# /sbin/genpowerd -#fi - -# Turn on process accounting. To enable process accounting, make sure the -# option for BSD process accounting is enabled in your kernel, and then -# create the file /var/log/pacct (touch /var/log/pacct). By default, process -# accounting is not enabled (since /var/log/pacct does not exist). This is -# because the log file can get VERY large. -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - /sbin/accton /var/log/pacct - chmod 640 /var/log/pacct - echo "Process accounting turned on." -fi - -# Start crond (Dillon's crond): -# If you want cron to actually log activity to /var/log/cron, then change -# -l10 to -l8 to increase the logging level. -if [ -x /usr/sbin/crond ]; then - /usr/sbin/crond -l10 >>/var/log/cron 2>&1 -fi - -# Start atd (manages jobs scheduled with 'at'): -if [ -x /usr/sbin/atd ]; then - /usr/sbin/atd -b 15 -l 1 -fi - -# Slackware-Mini-Quota-HOWTO: -# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to -# the appropriate partitions as listed in /etc/fstab. Here's an example: -# -# /dev/hda2 /home ext3 defaults,usrquota 1 1 -# -# You'll then need to setup initial quota files at the top of the partitions -# to support quota, like this: -# touch /home/aquota.user /home/aquota.group -# chmod 600 /home/aquota.user /home/aquota.group -# -# Then, reboot to activate the system. -# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the -# official Quota Mini-HOWTO has lots of useful information. That can be found -# here: /usr/doc/Linux-HOWTOs/Quota - -# Check quotas and then turn quota system on: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotacheck ]; then - echo "Checking filesystem quotas: /sbin/quotacheck -avugm" - /sbin/quotacheck -avugm - fi - if [ -x /sbin/quotaon ]; then - echo "Activating filesystem quotas: /sbin/quotaon -avug" - /sbin/quotaon -avug - fi -fi - -# Start the sendmail daemon: -if [ -x /etc/rc.d/rc.sendmail ]; then - . /etc/rc.d/rc.sendmail start -fi - -# Start the APM daemon if APM is enabled in the kernel: -if [ -x /usr/sbin/apmd ]; then - if cat /proc/apm 1> /dev/null 2> /dev/null ; then - echo "Starting APM daemon: /usr/sbin/apmd" - /usr/sbin/apmd - fi -fi - -# Start the ACPI (Advanced Configuration and Power Interface) daemon: -if [ -x /etc/rc.d/rc.acpid ]; then - . /etc/rc.d/rc.acpid start -fi - -# Load ALSA (sound) defaults: -if [ -x /etc/rc.d/rc.alsa ]; then - . /etc/rc.d/rc.alsa -fi - -# Load a custom screen font if the user has an rc.font script. -if [ -x /etc/rc.d/rc.font ]; then - . /etc/rc.d/rc.font -fi - -# Load a custom keymap if the user has an rc.keymap script. -if [ -x /etc/rc.d/rc.keymap ]; then - . /etc/rc.d/rc.keymap -fi - -# Initialize HP Officejet support: -if [ -x /etc/rc.d/rc.hpoj ]; then - . /etc/rc.d/rc.hpoj start -fi - -# Start the MySQL database: -if [ -x /etc/rc.d/rc.mysqld ]; then - . /etc/rc.d/rc.mysqld start -fi - -# Start Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - . /etc/rc.d/rc.httpd start -fi - -# Start Samba (a file/print server for Win95/NT machines). -# Samba can be started in /etc/inetd.conf instead. -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba start -fi - -# Start the GPM mouse server: -if [ -x /etc/rc.d/rc.gpm ]; then - . /etc/rc.d/rc.gpm start -fi - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Start the local setup procedure. -if [ -x /etc/rc.d/rc.local ]; then - . /etc/rc.d/rc.local -fi - -# All done. diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.S b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.S deleted file mode 100755 index 05c75b4..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.S +++ /dev/null @@ -1,294 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.S: System initialization script. -# -# Mostly written by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -PATH=/sbin:/usr/sbin:/bin:/usr/bin - -# Mount /proc right away: -/sbin/mount -v proc /proc -n -t proc - -# If 'nohotplug' was given at boot, or rc.hotplug has been turned off -# (is not executable), then shut off hotplugging in the kernel now. -# Turning off hotplug is *not* recommended, and will break some things. -if [ -w /proc/sys/kernel/hotplug ]; then - if grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "/dev/null" > /proc/sys/kernel/hotplug - elif [ ! -x /etc/rc.d/rc.hotplug ]; then - echo "/dev/null" > /proc/sys/kernel/hotplug - fi -fi - -# Start devfsd if necessary. On newer kernels, udev should be used instead. -if [ -x /etc/rc.d/rc.devfsd ]; then - /etc/rc.d/rc.devfsd start -fi - -# Mount sysfs next, if the kernel supports it: -if [ -d /sys ]; then - if cat /proc/filesystems | grep -w sysfs 1> /dev/null 2> /dev/null ; then - if ! cat /proc/mounts | grep -w sysfs 1> /dev/null 2> /dev/null ; then - /sbin/mount -v sysfs /sys -n -t sysfs - fi - fi -fi - -# Initialize udev to manage /dev entries for 2.6.x kernels: -if [ -x /etc/rc.d/rc.udev ]; then - if ! grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - /etc/rc.d/rc.udev - fi -fi - -# Enable swapping: -/sbin/swapon -a - -# Test to see if the root partition is read-only, like it ought to be. -READWRITE=no -if touch /fsrwtestfile 2>/dev/null; then - rm -f /fsrwtestfile - READWRITE=yes -else - echo "Testing root filesystem status: read-only filesystem" -fi - -# See if a forced filesystem check was requested at shutdown: -if [ -r /etc/forcefsck ]; then - FORCEFSCK="-f" -fi - -# Check the root filesystem: -if [ ! $READWRITE = yes ]; then - RETVAL=0 - if [ ! -r /etc/fastboot ]; then - echo "Checking root filesystem:" - /sbin/fsck $FORCEFSCK -C -a / - RETVAL=$? - fi - # An error code of 2 or higher will require a reboot. - if [ $RETVAL -ge 2 ]; then - # An error code equal to or greater than 4 means that some errors - # could not be corrected. This requires manual attention, so we - # offer a chance to try to fix the problem in single-user mode: - if [ $RETVAL -ge 4 ]; then - echo - echo "***********************************************************" - echo "*** An error occurred during the root filesystem check. ***" - echo "*** You will now be given a chance to log into the ***" - echo "*** system in single-user mode to fix the problem. ***" - echo "*** ***" - echo "*** If you are using the ext2 filesystem, running ***" - echo "*** 'e2fsck -v -y <partition>' might help. ***" - echo "***********************************************************" - echo - echo "Once you exit the single-user shell, the system will reboot." - echo - PS1="(Repair filesystem) \#"; export PS1 - sulogin - else # With an error code of 2 or 3, reboot the machine automatically: - echo - echo "***********************************" - echo "*** The filesystem was changed. ***" - echo "*** The system will now reboot. ***" - echo "***********************************" - echo - fi - echo "Unmounting file systems." - /sbin/umount -a -r - /sbin/mount -n -o remount,ro / - echo "Rebooting system." - sleep 2 - reboot -f - fi - # Remount the root filesystem in read-write mode - echo "Remounting root device with read-write enabled." - /sbin/mount -w -v -n -o remount / - if [ $? -gt 0 ] ; then - echo - echo "Attempt to remount root device as read-write failed! This is going to" - echo "cause serious problems." - echo - echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition" - echo "read-write! You can make sure the root filesystem is getting mounted " - echo "read-write with the 'rw' flag to Loadlin:" - echo - echo "loadlin vmlinuz root=/dev/hda1 rw (replace /dev/hda1 with your root device)" - echo - echo "Normal bootdisks can be made to mount a system read-write with the rdev command:" - echo - echo "rdev -R /dev/fd0 0" - echo - echo "You can also get into your system by using a boot disk with a command like this" - echo "on the LILO prompt line: (change the root partition name as needed)" - echo - echo "LILO: mount root=/dev/hda1 rw" - echo - echo "Please press ENTER to continue, then reboot and use one of the above methods to" - echo -n "get into your machine and start looking for the problem. " - read junk; - fi -else - echo "Testing root filesystem status: read-write filesystem" - if cat /etc/fstab | grep ' / ' | grep umsdos 1> /dev/null 2> /dev/null ; then - ROOTTYPE="umsdos" - fi - if [ ! "$ROOTTYPE" = "umsdos" ]; then # no warn for UMSDOS - echo - echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!" - echo - echo "For filesystem checking to work properly, your system must initially mount" - echo "the root partition as read only. Please modify your kernel with 'rdev' so that" - echo "it does this. If you're booting with LILO, add a line:" - echo - echo " read-only" - echo - echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it." - echo - echo "If you boot from a kernel on a floppy disk, put it in the drive and type:" - echo " rdev -R /dev/fd0 1" - echo - echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag." - echo - echo "This will fix the problem *AND* eliminate this annoying message. :^)" - echo - echo -n "Press ENTER to continue. " - read junk; - fi -fi # Done checking root filesystem - -# Any /etc/mtab that exists here is old, so we delete it to start over: -/bin/rm -f /etc/mtab* -# Remounting the / partition will initialize the new /etc/mtab: -/sbin/mount -w -o remount / - -# Fix /etc/mtab to list sys and proc if they were not yet entered in -# /etc/mtab because / was still mounted read-only: -if [ -d /proc/sys ]; then - /sbin/mount -f proc /proc -t proc -fi -if [ -d /sys/bus ]; then - /sbin/mount -f sysfs /sys -t sysfs -fi - -# Set the system time from the hardware clock using hwclock --hctosys. -if [ -x /sbin/hwclock ]; then - if grep "^UTC" /etc/hardwareclock 1> /dev/null 2> /dev/null ; then - echo "Setting system time from the hardware clock (UTC)." - /sbin/hwclock --utc --hctosys - else - echo "Setting system time from the hardware clock (localtime)." - /sbin/hwclock --localtime --hctosys - fi -fi - -# Configure ISA Plug-and-Play devices: -if [ -r /etc/isapnp.conf ]; then - if [ -x /sbin/isapnp ]; then - /sbin/isapnp /etc/isapnp.conf - fi -fi - -# This loads any kernel modules that are needed. These might be required to -# use your ethernet card, sound card, or other optional hardware. -if [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then - . /etc/rc.d/rc.modules -fi - -# Configure runtime kernel parameters: -if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then - /sbin/sysctl -e -p /etc/sysctl.conf -fi - -# Initialize the Logical Volume Manager. -# This won't start unless we find /etc/lvmtab (LVM1) or -# /etc/lvm/backup/ (LVM2). This is created by /sbin/vgscan, so to -# use LVM you must run /sbin/vgscan yourself the first time (and -# create some VGs and LVs). -if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then - echo "Initializing LVM (Logical Volume Manager):" - # Check for device-mapper support. - if ! cat /proc/devices | grep -w device-mapper 1> /dev/null 2> /dev/null ; then - # If device-mapper exists as a module, try to load it. - if [ -r /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko ]; then - insmod /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko - fi - fi - # Scan for new volume groups: - /sbin/vgscan 2> /dev/null - if [ $? = 0 ]; then - # This needs a moment to register. - sleep 10 - # Make volume groups available to the kernel. - # This should also make logical volumes available. - /sbin/vgchange -ay - # Enable swapping again in case any LVs are used for swap. Ignore previous error. :-) - /sbin/swapon -a - fi -fi - -# Check all the non-root filesystems: -if [ ! -r /etc/fastboot ]; then - echo "Checking non-root filesystems:" - /sbin/fsck $FORCEFSCK -C -R -A -a -fi - -# mount non-root file systems in fstab (but not NFS or SMB -# because TCP/IP is not yet configured, and not proc because -# that has already been mounted): -/sbin/mount -a -v -t nonfs,nosmbfs,noproc - -# Clean up some temporary files: -( cd /var/log/setup/tmp && rm -rf * ) -/bin/rm -f /var/run/utmp /var/run/*pid /etc/nologin /var/run/lpd* \ - /var/run/ppp* /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot - -# Attempt to umount and remove any leftover /initrd: -if [ -d /initrd ]; then - /sbin/umount /initrd 2> /dev/null - rmdir /initrd 2> /dev/null - blockdev --flushbufs /dev/ram0 2> /dev/null -fi - -# Create a fresh utmp file: -touch /var/run/utmp -chown root.utmp /var/run/utmp -chmod 664 /var/run/utmp - -if [ "$ROOTTYPE" = "umsdos" ]; then # we need to update any files added in DOS: - echo "Synchronizing UMSDOS directory structure:" - echo " /sbin/umssync -r99 -v- /" - /sbin/umssync -r99 -v- / -fi - -# Setup the /etc/motd to reflect the current kernel level: -# THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT. -# COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION. -echo "$(/bin/uname -sr)." > /etc/motd - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Run serial port setup script: -# (CAREFUL! This can make some systems hang if the rc.serial script isn't -# set up correctly. If this happens, you may have to edit the file from a -# boot disk) -# -# . /etc/rc.d/rc.serial - -# Carry an entropy pool between reboots to improve randomness. -if [ -f /etc/random-seed ]; then - echo "Using /etc/random-seed to initialize /dev/urandom." - cat /etc/random-seed > /dev/urandom -fi -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.httpd b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.httpd deleted file mode 100644 index 00b8837..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.httpd +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.httpd -# -# Start/stop/restart the Apache web server. -# -# To make Apache start automatically at boot, make this -# file executable: chmod 755 /etc/rc.d/rc.httpd -# - -case "$1" in - 'start') - /usr/sbin/apachectl start ;; - 'stop') - /usr/sbin/apachectl stop ;; - 'restart') - /usr/sbin/apachectl restart ;; - *) - echo "usage $0 start|stop|restart" ;; -esac - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.inet2 b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.inet2 deleted file mode 100755 index db56589..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.inet2 +++ /dev/null @@ -1,129 +0,0 @@ -#!/bin/sh -# -# rc.inet2 This shell script boots up the entire network system. -# Note, that when this script is used to also fire -# up any important remote NFS disks (like the /usr -# directory), care must be taken to actually -# have all the needed binaries online _now_ ... -# -# Uncomment or comment out sections depending on which -# services your site requires. -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com> - - -# At this point, we are ready to talk to The World... - - -# Mount remote (NFS) filesystems: -if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then - # Start the RPC portmapper if we find NFS volumes defined in /etc/fstab, - # since it will need to be running in order to mount them. If portmap - # is not running, attempting to mount an NFS partition will cause mount - # to hang. Keep this in mind if you plan to mount unlisted partitions... - if [ -x /etc/rc.d/rc.portmap ]; then - . /etc/rc.d/rc.portmap start - else - # Warn about a possible NFS problem. It's also possible to mount NFS partitions - # without rpc.portmap by using '-o nolock' (not a good idea in most cases). - echo "WARNING: NFS partitions found in /etc/fstab, but /etc/rc.d/rc.portmap is" - echo " not executable. If you do not run portmap, NFS partitions will" - echo " not mount properly. To start rpc.portmap at boot, change the" - echo " permissions on /etc/rc.d/rc.portmap: chmod 755 /etc/rc.d/rc.portmap" - sleep 10 - fi - echo "Mounting remote (NFS) file systems: /sbin/mount -a -t nfs" - /sbin/mount -a -t nfs # This may be our /usr runtime! - # Show the mounted volumes: - /sbin/mount -v -t nfs -fi - -# Load the RPC portmapper if /etc/rc.d/rc.portmap is executable. -# This might be needed to mount NFS partitions that are not listed in /etc/fstab. -if [ -x /etc/rc.d/rc.portmap ]; then - . /etc/rc.d/rc.portmap start -fi - -# Mount remote (SMB) filesystems: -if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then - echo "Mounting remote (SMB) file systems: /sbin/mount -a -t smbfs" - /sbin/mount -a -t smbfs - # Show the mounted volumes: - /sbin/mount -v -t smbfs -fi - -# Start the system logger if it is not already running (maybe because /usr -# is on a network partition). -if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then - . /etc/rc.d/rc.syslog start -fi - -# If there is a firewall script, run it before enabling packet forwarding. -# See the HOWTOs on http://www.netfilter.org/ for documentation on -# setting up a firewall or NAT on Linux. In some cases this might need to -# be moved past the section below dealing with IP packet forwarding. -if [ -x /etc/rc.d/rc.firewall ]; then - /etc/rc.d/rc.firewall start -fi - -# Turn on IPv4 packet forwarding support. -if [ -x /etc/rc.d/rc.ip_forward ]; then - . /etc/rc.d/rc.ip_forward start -fi - -# Start the inetd server: -if [ -x /etc/rc.d/rc.inetd ]; then - /etc/rc.d/rc.inetd start -fi - -# Start the OpenSSH SSH daemon: -if [ -x /etc/rc.d/rc.sshd ]; then - echo "Starting OpenSSH SSH daemon: /usr/sbin/sshd" - /etc/rc.d/rc.sshd start -fi - -# Start the BIND name server daemon: -if [ -x /etc/rc.d/rc.bind ]; then - /etc/rc.d/rc.bind start -fi - -# Start NIS (the Network Information Service): -if [ -x /etc/rc.d/rc.yp ]; then - . /etc/rc.d/rc.yp start -fi - -# Start the NFS server. Note that for this to work correctly, you'll -# need to load the knfsd module for kernel NFS server support. -# You'll also need to set up some shares in /etc/exports, and be sure -# that /etc/rc.d/rc.portmap is executable. -# Starting the NFS server: -if [ -x /etc/rc.d/rc.nfsd ]; then - /etc/rc.d/rc.nfsd start -fi - -# Stuff you won't need follows. ;-) - -# # Start the network routing daemon: -# if [ -x /usr/sbin/routed ]; then -# echo "Starting network routing daemon: /usr/sbin/routed" -# /usr/sbin/routed -g -s -# fi - -# # Start the system status server: -# if [ -x /usr/sbin/rwhod ]; then -# echo "Starting system status server: /usr/sbin/rwhod" -# /usr/sbin/rwhod -# fi - -# # Fire up the PC-NFS daemon(s). This is a primarily obsolete system, and may -# # not be very secure. It's not at all needed for normal NFS server support. -# # You probably should not run this. -# if [ -x /usr/sbin/rpc.pcnfsd ]; then -# echo "Starting PC-NFS daemons: /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd" -# /usr/sbin/rpc.pcnfsd /var/spool/lpd -# fi -# if [ -x /usr/sbin/rpc.bwnfsd ]; then -# /usr/sbin/rpc.bwnfsd /var/spool/lpd -# fi - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.inetd b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.inetd deleted file mode 100644 index 9fe1419..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.inetd +++ /dev/null @@ -1,36 +0,0 @@ -#!/bin/sh -# Start/stop/restart inetd, the BSD Internet super-daemon. - -# Start inetd: -inetd_start() { - if [ -x /usr/sbin/inetd ]; then - echo "Starting Internet super-server daemon: /usr/sbin/inetd" - /usr/sbin/inetd - fi -} - -# Stop inetd: -inetd_stop() { - killall inetd -} - -# Restart inetd: -inetd_restart() { - inetd_stop - sleep 1 - inetd_start -} - -case "$1" in -'start') - inetd_start - ;; -'stop') - inetd_stop - ;; -'restart') - inetd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward deleted file mode 100644 index 52bd2fe..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh -# /etc/rc.d/rc.ip_forward: start/stop IP packet forwarding -# -# If you intend to run your Linux box as a router, i.e. as a -# computer that forwards and redistributes network packets, you -# will need to enable IP packet forwarding in your kernel. -# -# To activate IP packet forwarding at boot time, make this -# script executable: chmod 755 /etc/rc.d/rc.ip_forward -# -# To disable IP packet forwarding at boot time, make this -# script non-executable: chmod 644 /etc/rc.d/rc.ip_forward - -# Start IP packet forwarding: -ip_forward_start() { - if [ -f /proc/sys/net/ipv4/ip_forward ]; then - echo "Activating IPv4 packet forwarding." - echo 1 > /proc/sys/net/ipv4/ip_forward - fi - # When using IPv4 packet forwarding, you will also get the - # rp_filter, which automatically rejects incoming packets if the - # routing table entry for their source address doesn't match the - # network interface they're arriving on. This has security - # advantages because it prevents the so-called IP spoofing, - # however it can pose problems if you use asymmetric routing - # (packets from you to a host take a different path than packets - # from that host to you) or if you operate a non-routing host - # which has several IP addresses on different interfaces. To - # turn rp_filter off, uncomment the lines below: - #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then - # echo "Disabling rp_filter." - # echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter - #fi -} - -# Stop IP packet forwarding: -ip_forward_stop() { - if [ -f /proc/sys/net/ipv4/ip_forward ]; then - echo "Disabling IPv4 packet forwarding." - echo 0 > /proc/sys/net/ipv4/ip_forward - fi -} - -# Restart IP packet forwarding: -ip_forward_restart() { - ip_forward_stop - sleep 1 - ip_forward_start -} - -case "$1" in -'start') - ip_forward_start - ;; -'stop') - ip_forward_stop - ;; -'restart') - ip_forward_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.local b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.local deleted file mode 100755 index 3cf2076..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.local +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.local: Local system initialization script. -# -# Put any local setup commands in here: diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.mysqld b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.mysqld deleted file mode 100644 index 239e2e6..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.mysqld +++ /dev/null @@ -1,80 +0,0 @@ -#!/bin/sh -# Start/stop/restart mysqld. -# -# Copyright 2003 Patrick J. Volkerding, Concord, CA -# Copyright 2003 Slackware Linux, Inc., Concord, CA -# -# This program comes with NO WARRANTY, to the extent permitted by law. -# You may redistribute copies of this program under the terms of the -# GNU General Public License. - -# To start MySQL automatically at boot, be sure this script is executable: -# chmod 755 /etc/rc.d/rc.mysqld - -# Before you can run MySQL, you must have a database. To install an initial -# database, do this as root: -# -# su - mysql -# mysql_install_db -# -# Note that step one is becoming the mysql user. It's important to do this -# before making any changes to the database, or mysqld won't be able to write -# to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql'). - -# To disallow outside connections to the database (if you don't need them, this -# is recommended to increase security), uncomment the next line: -#SKIP="--skip-networking" - -# Start mysqld: -mysqld_start() { - if [ -x /usr/bin/mysqld_safe ]; then - # If there is an old PID file (no mysqld running), clean it up: - if [ -r /var/run/mysql/mysql.pid ]; then - if ! ps ax | grep mysqld 1> /dev/null 2> /dev/null ; then - echo "Cleaning up old /var/run/mysql/mysql.pid." - rm -f /var/run/mysql/mysql.pid - fi - fi - /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP & - fi -} - -# Stop mysqld: -mysqld_stop() { - # If there is no PID file, ignore this request... - if [ -r /var/run/mysql/mysql.pid ]; then - killall mysqld - # Wait at least one minute for it to exit, as we don't know how big the DB is... - for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \ - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do - if [ ! -r /var/run/mysql/mysql.pid ]; then - break; - fi - sleep 1 - done - if [ "$second" = "60" ]; then - echo "WARNING: Gave up waiting for mysqld to exit!" - sleep 15 - fi - fi -} - -# Restart mysqld: -mysqld_restart() { - mysqld_stop - mysqld_start -} - -case "$1" in -'start') - mysqld_start - ;; -'stop') - mysqld_stop - ;; -'restart') - mysqld_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.postfix b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.postfix deleted file mode 100644 index bc32367..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.postfix +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/sh -# -## Slackware init script for postfix -## 20030828 Manolis Tzanidakis -# - -postfix_start() { - if [ -x /usr/sbin/postfix ]; then - echo -n "Starting postfix MTA: " - echo "/usr/sbin/postfix start" - /usr/sbin/postfix start 2>/dev/null - fi -} - -postfix_stop() { - /usr/sbin/postfix stop 2>/dev/null -} - -postfix_restart() { - sh $0 stop - sleep 1 - sh $0 start -} - -postfix_reload() { - /usr/sbin/postfix reload 2>/dev/null -} - -case "$1" in - 'start') - postfix_start - ;; - 'stop') - postfix_stop - ;; - 'restart') - postfix_restart - ;; - 'reload') - postfix_reload - ;; - *) - echo "usage $0 start|stop|restart|reload" -esac - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sendmail b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sendmail deleted file mode 100644 index 1a31c52..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sendmail +++ /dev/null @@ -1,38 +0,0 @@ -#!/bin/sh -# Start/stop/restart sendmail. - -# Start sendmail: -sendmail_start() { - if [ -x /usr/sbin/sendmail ]; then - echo "Starting sendmail MTA daemon: /usr/sbin/sendmail -L sm-mta -bd -q25m" - /usr/sbin/sendmail -L sm-mta -bd -q25m - echo "Starting sendmail MSP queue runner: /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m" - /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m - fi -} - -# Stop sendmail: -sendmail_stop() { - killall sendmail -} - -# Restart sendmail: -sendmail_restart() { - sendmail_stop - sleep 1 - sendmail_start -} - -case "$1" in -'start') - sendmail_start - ;; -'stop') - sendmail_stop - ;; -'restart') - sendmail_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.serial b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.serial deleted file mode 100755 index 5f31c01..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.serial +++ /dev/null @@ -1,132 +0,0 @@ -# -# /etc/rc.serial -# Initializes the serial ports on your system -# -# chkconfig: 2345 50 75 -# description: This initializes the settings of the serial port -# -# FILE_VERSION: 19981128 -# -# Distributed with setserial and the serial driver. We need to use the -# FILE_VERSION field to assure that we don't overwrite a newer rc.serial -# file with a newer one. -# -# XXXX For now, the autosave feature doesn't work if you are -# using the multiport feature; it doesn't save the multiport configuration -# (for now). Autosave also doesn't work for the hayes devices. -# - -RCLOCKFILE=/var/lock/subsys/serial -DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ." -PATH=/bin:/sbin:/usr/bin -DRIVER=serial -DRIVER_NAME=serial -MODULE_REGEXP="serial\b" - -ALLDEVS="/dev/ttyS?" -if /bin/ls /dev/ttyS?? >& /dev/null ; then - ALLDEVS="$ALLDEVS /dev/ttyS??" -fi - -SETSERIAL="" -if test -x /bin/setserial ; then - SETSERIAL=/bin/setserial -elif test -x /sbin/setserial ; then - SETSERIAL=/sbin/setserial -fi - -# -# See if the serial driver is loaded -# -LOADED="" -if test -f /proc/devices; then - if grep -q " ttyS$" /proc/devices ; then - LOADED="yes" - else - LOADED="no" - fi -fi - -# -# Find the serial driver -# -for i in $DIRS -do - if test -z "$MODULE" -a -f $i/$DRIVER.o ; then - MODULE=$i/$DRIVER.o - fi -done - -if ! test -f /proc/modules ; then - MODULE="" -fi - -# -# Handle System V init conventions... -# -case $1 in -start) - action="start"; - ;; -stop) - action="stop"; - ;; -*) - action="start"; -esac - -if test $action = stop ; then - if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \ - `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then - echo -n "Saving state of serial devices... " - grep "^#" /etc/serial.conf > /etc/.serial.conf.new - ${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new - mv /etc/serial.conf /etc/.serial.conf.old - mv /etc/.serial.conf.new /etc/serial.conf - echo "done." - fi - if test -n "$MODULE" ; then - module=`grep $MODULE_REGEXP /proc/modules | awk '{print $1}'` - if test -z "$module" ; then - echo "The $DRIVER_NAME driver is not loaded." - rm -f ${RCLOCKFILE} - exit 0 - fi - if rmmod $module ; then :; else - echo "The $DRIVER_NAME driver could NOT be unloaded." - exit 1; - fi - echo "The $DRIVER_NAME driver has been unloaded." - fi - rm -f ${RCLOCKFILE} - exit 0 -fi - -# -# If not stop, it must be a start.... -# - -if test -n "$MODULE" -a "$LOADED" != "yes" ; then - if insmod -f $MODULE $DRIVER_ARG ; then - true - else - echo "Couldn't load $DRIVER_NAME driver." - exit 1 - fi -fi - -if test -f /etc/serial.conf ; then - if test -n ${SETSERIAL} ; then - grep -v ^# < /etc/serial.conf | while read device args - do - if [ ! "$device" = "" -a ! "$args" = "" ]; then - ${SETSERIAL} -z $device $args - fi - done - fi -else - echo "###AUTOSAVE###" > /etc/serial.conf -fi - -touch ${RCLOCKFILE} -${SETSERIAL} -bg ${ALLDEVS} diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sshd b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sshd deleted file mode 100755 index a3707e3..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sshd +++ /dev/null @@ -1,50 +0,0 @@ -#!/bin/sh -# Start/stop/restart the secure shell server: - -sshd_start() { - # Create host keys if needed. - if [ ! -r /etc/ssh/ssh_host_key ]; then - /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N '' - fi - if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then - /usr/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N '' - fi - if [ ! -f /etc/ssh/ssh_host_rsa_key ]; then - /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N '' - fi - /usr/sbin/sshd -} - -sshd_stop() { - killall sshd -} - -sshd_restart() { - if [ -r /var/run/sshd.pid ]; then - echo "WARNING: killing listener process only. To kill every sshd process, you must" - echo " use 'rc.sshd stop'. 'rc.sshd restart' kills only the parent sshd to" - echo " allow an admin logged in through sshd to use 'rc.sshd restart' without" - echo " being cut off. If sshd has been upgraded, new connections will now" - echo " use the new version, which should be a safe enough approach." - kill `cat /var/run/sshd.pid` - else - killall sshd - fi - sleep 1 - sshd_start -} - -case "$1" in -'start') - sshd_start - ;; -'stop') - sshd_stop - ;; -'restart') - sshd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac - diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.syslog b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.syslog deleted file mode 100755 index a005fb7..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.syslog +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# Start/stop/restart the system logging daemons. -# -# Written for Slackware Linux by Patrick J. Volkerding <volkerdi@slackware.com>. - -syslogd_start() { - if [ -x /usr/sbin/syslogd -a -x /usr/sbin/klogd ]; then - echo -n "Starting sysklogd daemons: " - echo -n "/usr/sbin/syslogd " - /usr/sbin/syslogd - sleep 1 # prevent syslogd/klogd race condition on SMP kernels - echo "/usr/sbin/klogd -c 3 -x" - # '-c 3' = display level 'error' or higher messages on console - # '-x' = turn off broken EIP translation - /usr/sbin/klogd -c 3 -x - fi -} - -syslogd_stop() { - killall syslogd 2> /dev/null - killall klogd 2> /dev/null -} - -syslogd_restart() { - syslogd_stop - sleep 1 - syslogd_start -} - -case "$1" in -'start') - syslogd_start - ;; -'stop') - syslogd_stop - ;; -'restart') - syslogd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit b/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit deleted file mode 100755 index 916e59e..0000000 --- a/trunk/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit +++ /dev/null @@ -1,58 +0,0 @@ -#!/bin/sh -# -# rc.sysvinit This file provides basic compatibility with SystemV style -# startup scripts. The SystemV style init system places -# start/stop scripts for each runlevel into directories such as -# /etc/rc.d/rc3.d/ (for runlevel 3) instead of starting them -# from /etc/rc.d/rc.M. This makes for a lot more init scripts, -# and a more complicated execution path to follow through if -# something goes wrong. For this reason, Slackware has always -# used the traditional BSD style init script layout. -# -# However, many binary packages exist that install SystemV -# init scripts. With rc.sysvinit in place, most well-written -# startup scripts will work. This is primarily intended to -# support commercial software, though, and probably shouldn't -# be considered bug free. -# -# Written by Patrick Volkerding <volkerdi@slackware.com>, 1999 -# from an example by Miquel van Smoorenburg <miquels@cistron.nl>. - -# Run an init script: -startup() { - case "$1" in - *.sh) - sh "$@" - ;; - *) - "$@" - ;; - esac -} - -# Set onlcr to avoid staircase effect. -stty onlcr 0>&1 - -if [ "$runlevel" = "" ]; then - runlevel=$RUNLEVEL - export runlevel - prevlevel=$PREVLEVEL - export prevlevel -fi - -# Run kill scripts in the previous runlevel if not "none" -if [ ! "$prevlevel" = "N" ]; then - for script in /etc/rc.d/rc$prevlevel.d/K* ; do - if [ -x $script ]; then - startup $script stop - fi - done -fi - -# Now do the startup scripts: -for script in /etc/rc.d/rc$runlevel.d/S* ; do - if [ -x $script ]; then - startup $script start - fi -done - |